Introduction to aluminum plate maintenance

Introduction to aluminum plate maintenance and repair The specific cleaning steps of aluminum plate are as follows:

1. First, wash the surface of the plate with plenty of water;

2. Use a soft cloth soaked with water diluted detergent to gently wipe the surface of the test panel;

3. Then wash the board surface with plenty of water to wash away the dirt;

4. Check the board surface, and focus on the area not cleaned with detergent;

5. Rinse the board surface with clean water until the detergent is completely washed away.

Note: Do not clean the hot board surface (when the temperature exceeds 40 ° C), because too fast evaporation of water is harmful to the baking varnish on the board surface! In particular, please choose the appropriate detergent. A basic principle is: you must choose neutral detergent! Please do not use strong alkaline detergents such as potassium hydroxide, sodium hydroxide or sodium carbonate, strong acidic detergents, abrasive detergents and baking varnish soluble detergents.

Aluminum plate picture 6